Caractéristiques physiques des plastiques de laboratoire standard

PHYSICAL PROPERTIES of ABDOS Labware

Sterilization

  • Autoclaving (121°C, 15 psi for 20 minutes) Clean and rinse item with distilled water before autoclaving. Certain chemicals which have no appreciable effect on resins at room temperature may cause deterioration at autoclaving temperatures. ALWAYS COMPLETELY DISENGAGE THREADS BEFORE AUTOCLAVING.
  • Gas – Ethylane oxide, fomaldehyde.
  • Dry Heat – 106°C for 120 minutes
  • Disinfection – Benzalkonium chloride, Formalin, Ethanol,etc.
  • Radiation – gamma irradiated at 2.5 Mard with unstablized plastic.
  • + Sterilizing reduces mechanical strength. Do not use PC vessels
    for vacuum application if they have been autoclaved.

Collaborons's

Découvrez des articles de laboratoire de haute qualité, conçus pour la précision, la valeur et la performance.

Faire progresser la science grâce à la qualité

Se connecter avec nos experts

    Soumettre